Antenna Feeder No.1 Removal/Installation

ANTENNA FEEDER NO.1 REMOVAL/INSTALLATION

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the following parts:
a. Console Console Removal/Installation

b. Glove compartment Service and Repair

c. Side wall Side Wall Removal/Installation

d. Console panel Console Panel Removal/Installation

e. Center panel unit Center Panel Unit Removal/Installation

f. Lower panel Lower Panel Removal/Installation

g. Knee bolster Knee Bolster Removal/Installation

h. Column cover Service and Repair

i. Driver-side air bag module Driver-Side Air Bag Module Removal/Installation

j. Steering wheel Service and Repair

k. Combination switch Removal and Replacement

l. Steering shaft Service and Repair

m. Meter hood Meter Hood Removal/Installation

n. Instrument cluster Removal and Replacement

o. Side panel Side Panel Removal/Installation

p. Hood release lever Service and Repair

q. Female wedge Convertible Top Disassembly/Assembly

r. A-pillar trim A-Pillar Trim Removal/Installation

s. Scuff plate Scuff Plate Removal/Installation

t. Front side trim Front Side Trim Removal/Installation

u. Fuse box No.1

v. Dashboard Dashboard Removal/Installation

4. Remove clips A and B.

5. Disconnect the connector.

6. Remove the antenna feeder No.1.

7. Install in the reverse order of removal.