Sirius Satellite Radio Antenna Feeder Inspection

SIRIUS SATELLITE RADIO ANTENNA FEEDER INSPECTION

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the following parts:
a. Trunk end trim Trunk End Trim Removal/Installation

b. Partition board

c. Trunk side trim (RH) Front Side Trim Removal/Installation

4. Disconnect the SIRIUS satellite radio antenna connector. Sirius Satellite Radio Antenna Removal/Installation

5. Disconnect the SIRIUS satellite radio antenna feeder connector. Sirius Satellite Radio Antenna Feeder Removal/Installation

6. Verify that the continuity is as indicated in the table.






- If not as indicated in the table, replace the SIRIUS satellite radio antenna feeder.