Climate Control Unit Inspection [Manual Air Conditioner]

CLIMATE CONTROL UNIT INSPECTION [MANUAL AIR CONDITIONER]

1. Switch the ignition to ON.

2. Connect the negative (-) lead of the tester to body ground.

3. By inserting the positive (+) lead of the tester into each climate control unit terminal, measure the voltage according to the terminal voltage table.

- If there is any malfunction, inspect the parts under "Inspection item (s)".

- If the parts under "Inspection item (s)" are found to be normal, replace the climate control unit.

Terminal Voltage Table (Reference)

Terminal Voltage Table (Part 1):

Terminal Voltage Table (Part 2):