Marker Lamp: Service and Repair

FRONT SIDE MARKER LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. Removal and Replacement

2. Remove the fasteners, then slightly bend back the mudguard.

3. Remove the screws shown in the figure and remove the front fog light.






4. Release the tabs shown in the figure.






5. Remove the front fog light hole cover from the front bumper by pulling the front fog light hole cover in the direction of the arrow in the figure.






6. Remove screws A and B, then remove the cover.






7. Remove the screws shown in the figure, and then remove the front side marker light.






8. Set aside the hook and remove the cover from the front side marker light after removing the screws shown in the figure.






9. Install in the reverse order of removal.