Reading and Clearing Diagnostic Trouble Codes
TIRE PRESSURE MONITORING SYSTEM (TPMS) ON-BOARD DIAGNOSIS
Reading DTCs Procedure
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
1 Select "Self Test".
2 Select "Modules".
3 Select "IC".
- When using the PDS (Pocket PC)
1 Select "Module Tests".
2 Select "IC".
3 Select "Self Test".
3. Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
4. After completion of repairs, clear all DTCs stored in the TPMS.
Clearing DTCs Procedure
NOTE:
- If the DTC clearing procedure is implemented, the TPMS warning light and flat tire warning light turn off.
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
1 Select "Self Test".
2 Select "Modules".
3 Select "IC".
- When using the PDS (Pocket PC)
1 Select "Module Tests".
2 Select "IC".
3 Select "Self Test".
3. Verify the DTC according to the directions on the screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Verify that no DTCs are displayed.