Back-Up Light Switch Removal/Installation [M15M-D]

BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [M15M-D]

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Disconnect the back-up light switch connector and remove the back-up light switch.






4. Install the back-up light switch (with a new gasket) to the transaxle case.

Tightening torque
- 25-34 Nm {2.5-3.5 kgf-m, 18-25 ft-lbf}

5. Install in the reverse order of removal.