Engine Oil Control Valve: Service and Repair

OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [13B-MSP]

WARNING:
- Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled.
- Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin by washing with soap and water immediately after working with engine oil.

1. Remove the engine cover. Service and Repair

2. Remove the battery cover. Removal and Replacement

3. Disconnect the negative battery cable. Removal and Replacement

4. Remove the air hose and air cleaner component. Intake-Air System Removal/Installation

5. Remove the throttle body with the water hoses still connected. Intake-Air System Removal/Installation

6. Remove the ignition coil and ignition coil bracket as a single unit.
Ignition coil bracket tightening torque
1 7.8-10.8 Nm {80-110 kgf-cm, 69.1-95.5 in-lbf}

7. Remove in the order indicated in the table.

8. Install in the reverse order of removal.