Component Tests and General Diagnostics
HEADLIGHT CLEANER RELAY INSPECTION
1. Remove the headlight cleaner relay with the connector still connected.
2. Measure the voltage at each terminal (other than terminal F).
- If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item(s)".
3. Disconnect the negative battery cable.
4. Verify that continuity at terminal F is as indicated in the Terminal Voltage Table (Reference).
- If there is any malfunction, inspect the parts under "Inspection item(s)".
- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the headlight cleaner relay.
Terminal Voltage Table (Reference)
