Mainshaft Rear Bearing and Countershaft Rear Bearing Locknut Assembly Note
Mainshaft Rear Bearing and Countershaft Rear Bearing Locknut Assembly Note1. Slide the 5th/6th and 1st/2nd clutch hub sleeves to lock the transmission into 5th and 2nd gears.
2. Insert the mainshaft rear bearing into the mainshaft and install the locknut.
3. Attach the SST to the locknut and tighten the nut to the specified torque.
Caution: Attach the SST with the locknut seated in the bearing.
Tightening torque:
187 - 245 N-m (19.1 - 24.9 kgf-m, 138 - 180 ft-lbf)
4. Tighten the countershaft locknut in the counterclockwise direction.
Tightening torque:
98 - 147 N-m (10.0 - 14.9 kgf-m, 72.3 - 108 ft-lbf)
5. Using the pin punch, stake the mainshaft rear bearing locknut.
6. Using the pin punch, stake the countershaft rear bearing locknut.