Manual Transmission/Transaxle: Testing and Inspection

TRANSMISSION OIL INSPECTION [P66M-D]

1. Position the vehicle on level ground.

2. Remove oil filler plug.






3. Verify that the oil is near the brim of the plug port.

- If the oil is not near the brim of the plug port, add the specified amount and type of oil.

Transmission case specified oil grade
- API Service GL-4

Transmission case specified oil viscosity
- SAE 75W-90

4. Install oil filler plug and a new washer.

Tightening torque
- 40-59 Nm {4.1-6.0 kgf-m, 30-43 ft-lbf}