Initial Inspection and Diagnostic Overview

SELF-DIAGNOSTIC [CAR-NAVIGATION SYSTEM]

Starting Procedure For Diagnostic Function

1. Turn the ignition switch to ACC or ON position.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Menu".

If inspecting vehicle condition signals:
- Select "Vehicle Signal".










*
It is used for symptom troubleshooting. (Troubleshooting index No.4, No.5, No.7 and No.8)

If inspecting microphone related signals:

1. Select "Navigation Check Menu".

2. Select "Microphone Check".










*
It is used for symptom troubleshooting. (Troubleshooting index No.8)

If inspecting gyro sensor signals:

1. Select "Navigation Check Menu".

2. Select "Vehicle Sensors".