Radio, Stereo, and Compact Disc: Application and ID

SUPPLIER IDENTIFICATION PROCEDURE [AUDIO]

NOTE:
- The supplier can vary with the module. When asking the supplier (service center) for repair or replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.

Identification Using the Label or Inscribed Lettering

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the following parts:
a. Side wall Side Wall Removal/Installation

b. Selector lever knob (ATX) Service and Repair

c. Shift lever knob (MTX) Service and Repair

d. Center console (with rear vent) Center Console Removal/Installation

e. Front console Front Console Removal/Installation

f. Center panel module Center Panel Module Removal/Installation

4. Verify the supplier by referring to the label attached to each unit.

Verify Using the Diagnostic Assist Function

1. Turn the ignition switch to the AEE or ON position.

2. Turn the audio unit power to on.

3. While pressing the POWER/VOLUME button, simultaneously press the Preset button "5" for 3 s or more.






4. Identify the supplier code by referring to the information display.










NOTE:
- The supplier code can also be identified from the DTC displays screen.






5. Cancel the diagnostic assist function by either turning off the audio unit power or by ignition to the switched off.