Front Seat Disassembly/Assembly

FRONT SEAT DISASSEMBLY/ASSEMBLY

WARNING:
- Handling the front seat (side air bag, seat weight sensor) improperly can accidentally deploy the side air bag, which may seriously injure you. Read the service warnings and cautions before handling the air bag module. Air Bag System Service Warnings Air Bag System Service Cautions

CAUTION:
- For vehicles with the two-step deployment air bag system, if any of the following work is performed, perform the seat weight sensor calibration using the M-MDS.

- Replacement with a new seat weight sensor
- Replacement with a new seat weight sensor control module
- Replacement with new passenger-side seat parts
- Disassembly of the passenger-side seat

- For vehicles with the two-step deployment air bag system, if any of the following work is performed, perform the seat weight sensor inspection using the M-MDS. Component Tests and General Diagnostics

- Removal of the passenger-side seat
- Loosening and retightening of passenger's seat fixing bolts
- After removing a front seat, do not operate the slider lever. If the slider lever is operated, the left and right slide positions will deviate, and the slide adjuster may be damaged after the front seat is installed.
- Verify that there are no malfunctions in the sliding mechanism after installing a front seat.
- When performing the procedure with a front seat removed from the vehicle, perform the procedure on a clean rag so as not to damage or soil the seat.

1. Disassemble in the order indicated in the table.

2. Assemble in the reverse order of disassembly.

Driver's Seat









Passenger's Seat