Solar Sensor: Service and Repair

SOLAR RADIATION SENSOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Pry the solar radiation sensor from the dashboard using a flathead screwdriver wrapped with protective tape.

CAUTION:
- After the solar radiation sensor removal, the sensor connector could fall in the dashboard making the installation difficult. Therefore, hold the rooted end of the sensor connector using a clip or similar tool to prevent it from falling.

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.