Removal and Replacement

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

CAUTION:
- When replacing the instrument cluster, the configuration procedure must be performed before removing the instrument cluster. Replacing the instrument cluster without performing the configuration procedure will result in system malfunction.

1. Perform the instrument cluster configuration when replacing it. Programming and Relearning

2. Remove the battery cover. Removal and Replacement

3. Disconnect the negative battery cable.

4. Remove the meter hood. Meter Hood Removal/Installation

5. Remove the screw.










6. Remove the instrument cluster.

7. Disconnect the connector.

8. Install in the reverse order of removal.

9. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following procedure:

- See Programming and Relearning

CAUTION:
- The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.