Freeze Frame PID Data Access Procedure

TIRE PRESSURE MONITORING SYSTEM (TPMS) ON-BOARD DIAGNOSIS

Freeze Frame PID Data Access Procedure

NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the freeze frame PID data access.

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Body".
2 Select "TPMS Functions".

3. Then, select an item from the screen menu.

- "Freeze Frame Data"

4. Perform the procedure according to the directions on the screen.

PID/DATA Monitor Table

PID/Data Monitor Table (Part 1):

PID/Data Monitor Table (Part 2):

*
Data transmission from the wheel unit occurs when the vehicle speed is 25 km/h {15.5 mph} or more. Due to this, the current air pressure and temperature data can only be displayed after the vehicle is driven at 25 km/h {15.5 mph} or more. Also, the ID_LAST, and tire pressure and internal tire air temperature data are erased when the instrument cluster connector and the battery terminal are disconnected. If the instrument cluster is replaced or the battery terminals are disconnected, drive the vehicle at 25 km/h {15.5 mph} or more and display the tire pressure PID after the data transmission.