Programming and Relearning

AUTO LIGHT ILLUMINATION LEVEL SETTING

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Module Programming".

- When using the PDS (Pocket PC)

1 Select "Programming".
2 Select "Module Programming".

3. Then, select items from the screen menu in the following order.
1 Select "Programmable Parameters".
2 Select "Exterior Lighting".

4. Select the item name, and then select option.

- Autolamp On Setting (Standard (other) / Low (other) )

NOTE:
- When the M-MDS is set to Low, the auto-light sensor sensitivity decreases, and the TNS and headlight illumination timing is slower.