Fluid - M/T: Testing and Inspection
TRANSAXLE OIL INSPECTION [G35M-R]
1. Park the vehicle on level ground.
2. Remove the under cover.
3. Remove the oil level plug and washer.
4. Verify that the oil is near the brim of the plug port.
- If the oil level is lower than the low level, add the specified amount and type of oil through the oil level plug hole.
Manual transaxle oil Grade
- API service GL-4
Manual transaxle oil Viscosity
- SAE 75W-80
5. Install a new washer and the oil level plug.
Tightening torque
- 39-59 Nm {4.0-6.0 kgf-m, 29-43 ft-lbf}
6. Install the under cover.