Operation CHARM: Car repair manuals for everyone.

Rain Sensor: Service and Repair




RAIN SENSOR REMOVAL/INSTALLATION

CAUTION:
- The reflection rate at the moment the ignition switch is first turned on after replacing the rain sensor with a new one is stored as the condition indicating zero precipitation on the windshield. Therefore, before turning on the ignition switch, remove water and dirt from the windshield.
- In addition, rain sensor initialization is performed for the following cases: Testing and Inspection

- The windshield is replaced and the rain sensor is reused.
- The auto wiper system operates incorrectly.
- The rain sensor is integrated with the auto light sensor as a single unit.

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the rearview mirror cover. Rearview Mirror Removal Rearview Mirror Installation






4. Disconnect the rain sensor connector.

5. Slide the tab in the direction of the arrow and remove the rain sensor.

6. Install in the reverse order of removal.