Alignment: Specifications

FRONT WHEEL ALIGNMENT

Front wheel alignment [16-inch wheel]

NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right dimension for camber and caster is within 1°.

Front wheel alignment [17-inch wheel]

NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle is within 1°.

Rear wheel alignment [17-inch wheel]

NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle is within 1°.

RIDE HEIGHT

Measure height H from the center of the wheel to the fender brim.

Verify that the difference between the left and right dimension H is within the specification.

Standard 10 mm {0.39 in} or less