Operation CHARM: Car repair manuals for everyone.

B10A8




DTC B10A6, B10A7, B10A8, B10A9, B10AA

System Malfunction Location

B10A6-B10AA:





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- Resistance other than 1.10-5.77 ohms detected in lap pre-tensioner seat belt circuit
- Wiring harness between the lap pre-tensioner seat belt and SAS control module has a malfunction.

Possible Causes

- Lap pre-tensioner seat belt connector malfunction
- Open or short or short to ground or short to power supply circuit in the wiring harness between the lap pre-tensioner seat belt and SAS control module
- Lap pre-tensioner seat belt malfunction
- SAS control module malfunction

System Wiring Diagram





Diagnostic Procedure

Step 1:





Step 2:





Step 3-Step 5: