B1884
DTC B1884, B1890
System Malfunction Location
B1884-B1890:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Malfunction in PAD indicator circuit
Possible Causes
- Multi information display connector malfunction
- Multi information display malfunction
- Open or short circuit or short to ground or short to power supply in wiring harness between multi information display and SAS control module
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1-Step 3:
Step 4:
