B1997
DTC B1055, B1996, B1997, B1998, B1999
System Malfunction Location
B1055-B1999:
Detection Condition
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Resistance other than 1.10-9.64 ohms detected in passenger-side side air bag module circuit
- Wiring harness between the passenger-side side air bag module and SAS control module has a malfunction
Possible Causes
- Passenger-side side air bag module connector malfunction
- Open or short circuit or short to ground or short to power supply in the wiring harness between the passenger-side side air bag module and SAS control module
- Passenger-side side air bag module malfunction
- SAS control module malfunction
System Wiring Diagram
Diagnostic Procedure
Step 1:
Step 2:
