Removal and Replacement

INSTRUMENT CLUSTER REMOVAL/INSTALLATION

CAUTION:
- When replacing the instrument cluster, the configuration procedure must be performed before removing the instrument cluster. Replacing the instrument cluster without performing the configuration procedure will result in system malfunction.

1. Perform the instrument cluster configuration when replacing it. Programming and Relearning

2. Disconnect the negative battery cable.

3. Remove the column cover. (upper) Service and Repair

4. Remove the screws.






5. Pull the instrument cluster outward and remove it






6. Disconnect the connector.






7. Remove the clip.

8. Install in the reverse order of removal.

9. Program the immobilizer system-related parts when replacing the instrument cluster. (With keyless entry system) Immobilizer System-Related Parts Programming

CAUTION:
- The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.