Neutral Switch Removal/Installation [G66M-R]

NEUTRAL SWITCH REMOVAL/INSTALLATION [G66M-R]

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the battery component. (ex: battery, battery tray and PCM component) Removal and Replacement

4. Remove the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation

5. Drain the oil from the transaxle. Transaxle Oil Replacement [G66M-R]

6. Remove the neutral switch.






7. Install the neutral switch (with a new gasket) to the transaxle case.

Tightening torque
- 20-29 Nm {2.1-2.9 kgf-m, 15-21 ft-lbf}

8. Install the battery component. (ex: battery, battery tray and PCM component) Removal and Replacement

9. Install the battery cover. Removal and Replacement

10. Add the specified amount and type of oil. Transaxle Oil Replacement [G66M-R]

11. Install the aerodynamic under cover No.2. Aerodynamic Under Cover No.2 Removal/Installation