Navigation Check - Car-Navigation System

NAVIGATION CHECK [CAR-NAVIGATION SYSTEM]

Inspection item list










GPS Information

1. Turn ignition switch to ACC or ON position.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "GPS Information".

5. Verify the GPS information.
NOTE:
- The GPS reception signal is updated every 1 s.










6. To stop the on-board diagnostic mode, turn the ignition switch to the LOCK position.

Vehicle Sensors

1. Turn ignition switch to ACC or ON position.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "Vehicle Sensors".

5. Verify the sensor output condition of the sensor being input to the car navigation unit.
NOTE:
- The vehicle signal is updated every 1s.










6. To stop the on-board diagnostic mode, turn the ignition switch to the LOCK position.

History

1. Turn ignition switch to ACC or ON position.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "History".

5. Verify the displayed content.










6. To stop the on-board diagnostic mode, turn the ignition switch to the LOCK position.

Microphone Check

1. Turn ignition switch to ACC or ON position.

2. Launch the diagnostic mode. Starting Procedure For Diagnostic Mode - Car-Navigation System

3. Select "Navigation Check".

4. Select "Microphone Check".

5. Verify the microphone input condition.










6. To stop the on-board diagnostic mode, turn the ignition switch to the LOCK position.