Front ABS Wheel-Speed Sensor Inspection

FRONT ABS WHEEL-SPEED SENSOR INSPECTION

Installation Visual Inspection

1. Inspect the following items:

- If there is any malfunction, replace the applicable part.

a. Excessive play of the front ABS wheel-speed sensor

b. Deformation of the front ABS wheel-speed sensor

Sensor Output Value Inspection

CAUTION:
- Resistance inspection using other testers may cause damage to the ABS wheel-speed sensor internal circuit. Be sure to use the M-MDS to inspect the ABS wheel-speed sensor.

1. Turn the ignition switch off.

2. Connect the M-MDS to the DLC-2.






3. Select the following PIDs using the M-MDS:

- LF_WSPD
(LF wheel-speed sensor)
- RF_WSPD
(RF wheel-speed sensor)

4. Start the engine and drive the vehicle.

5. Verify that the display of the M-MDS shows the same value as the speedometer.

- If there is any malfunction, replace the front ABS wheel-speed sensor.