Fog/Driving Lamp Bulb: Service and Repair

FRONT FOG LIGHT BULB REMOVAL/INSTALLATION

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the fasteners.






4. Slightly bend back the mudguard.

5. Disconnect the front fog light bulb connector.






6. Rotate the front fog light bulb in the direction of the arrow shown in the figure and remove it.






CAUTION:
- A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up and the life of the bulb will be shortened. When handling the bulb, hold the flange, not the glass. Wipe off any finger prints before installation.

7. Install in the reverse order of removal.