Fog/Driving Lamp: Service and Repair

FRONT FOG LIGHT REMOVAL/INSTALLATION

1. Remove the battery cover.

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the fasteners.






4. Slightly bent back the mudguard.

5. Disconnect the front fog light connector.






6. Remove the screws shown in the figure, and then remove the front fog light.






7. Remove the bolt and screw.






8. Set aside the pin in the position shown in the figure and remove the front fog light from the cover.






9. Install in the reverse order of removal.

10. Adjust the front fog light aiming. Adjustments