Alignment: Specifications
FRONT WHEEL ALIGNMENT
Front wheel alignment [16-inch wheel]
Front wheel alignment [17-inch wheel]
NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right dimension for camber and caster is within 1°.
REAR WHEEL ALIGNMENT
Rear wheel alignment [16-inch wheel]
Rear wheel alignment [17-inch wheel]
NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right camber angle is within 1°.
Ride Height
Measure height H from the center of the wheel to the fender brim.
Verify that the difference between the left and right dimension H is within the specification.
If it exceeds the specification, repeat the Step 2-7.
Standard 10 mm {0.39 in} or less
*: Unloaded vehicle.Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.