Brake Light Bulb: Service and Repair

BRAKE/TAILLIGHT BULB REMOVAL/INSTALLATION

4SD

1. Disconnect the negative battery cable.

2. Remove the trunk mat.

3. Remove the trunk board.

4. Remove the trunk end trim. Trunk End Trim Removal/Installation

5. Partially peel back the trunk side trim.

6. Remove in the order indicated in the table.










7. Install in the reverse order of removal.

5HB

1. Disconnect the negative battery cable.

2. Remove the service hole cover.






3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.