Tail Lamp: Service and Repair

REAR COMBINATION LIGHT REMOVAL/INSTALLATION

4SD

1. Disconnect the negative battery cable.

2. Remove the trunk mat.

3. Remove the trunk board.

4. Remove the trunk end trim. Trunk End Trim Removal/Installation

5. Remove the trunk side trim.

6. Disconnect the connectors shown in the figure and remove the nuts.






7. Pull the rear combination light in the direction of the arrow to detach it from the hook.






8. Remove the rear combination light.

9. Install in the reverse order of removal.

5HB

1. Disconnect the negative battery cable.

2. Remove the service hole cover.






3. Disconnect the connectors shown in the figure and remove the nuts.






4. Pull the rear combination light in the direction of the arrow to detach it from the hook.






5. Remove the rear combination light.

6. Install in the reverse order of removal.