Programming and Relearning

LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

Auto Light System

NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.

- Select the "Module Programming"

3. Then, select items from the screen menu in the following order.

- Select "Programmable Parameters"
- Select "Exterior Lighting"

4. Select the item name, and then select option.





NOTE:
- If the mode is set to "Low (Other)" , the illumination level for illuminating the TNS and headlights decreases. Therefore, the TNS and headlights illuminate when the ambient light is lower than when the level is set to "Standard (Other)".

Room Light Control System / Turn Light System

- For the room light control system and turn light system, refer to the control system personalization features setting. Control System Personalization Features Setting Procedure