Fuel Tank Pressure Sensor: Testing and Inspection

FUEL TANK PRESSURE SENSOR INSPECTION [L3 WITH TC]

Voltage Inspection

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the evaporative hose component. Service and Repair

4. Switch the ignition to ON.

5. Plug one end of the evaporative hose component and verify that the output voltage from the fuel tank pressure sensor changes when pressure is applied from the other hose end.

- If it cannot be verified even though the related harnesses have no malfunction, replace the evaporative hose component. Service and Repair