Starting Procedure For Diagnostic Mode - Navigation System

STARTING PROCEDURE FOR DIAGNOSTIC MODE [CAR-NAVIGATION SYSTEM]

1. Turn ignition switch to ACC or ON position.

2. Press the MENU switch (panel switch).






3. Select "Navigation Setup".






4. Select "Calibration".






5. Select "Map Version".






6. Press the A portion of the MAP VERSION screen two times.






7. Press the B portion of the MAP VERSION screen two times.

8. Select "Menu".






9. Select the items to be inspected from the diagnosis menu. Diagnostic Check - Navigation System

10. To stop the on-board diagnostic mode, turn the ignition switch to the LOCK position.