Auxiliary Power Outlet: Service and Repair

ACCESSORY SOCKET REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the hole cover. Removal and Replacement

3. Remove in the order indicated in the table.










4. Install in the reverse order of removal.

Accessory Socket Removal Note

1. Remove the accessory socket in the direction of the arrow (2) shown in the figure while opening the caps in the direction of the arrow (1) using a tape-wrapped fastener remover.






Cap Removal Note

1. Remove the cap in the direction of the arrow (2) shown in the figure while pressing the cap tabs in the direction of the arrow (1).