Removal and Replacement

GENERATOR REMOVAL/INSTALLATION [13B-MSP]

WARNING:
- Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.

- When the battery cables are connected, touching the vehicle body with generator terminal B will generate sparks. This can cause personal injury, fire, and damage to the electrical components. Always disconnect the negative battery cable before performing the following operation.

1. Remove the engine cover. Service and Repair

2. Remove the battery cover. Removal and Replacement

3. Disconnect the negative battery cable. Removal and Replacement

4. Remove the front suspension tower bar. Front Suspension Tower Bar Removal/Installation - MT Front Suspension Tower Bar Removal/Installation - AT

5. Remove the air hose (air cleaner to throttle body). Intake-Air System Removal/Installation

6. Position the drive belt out of the way. Service and Repair

7. Remove in the order indicated in the table.

8. Install in the reverse order of removal.