Seals and Gaskets: Service and Repair

OIL SEAL (EXTENSION HOUSING) REPLACEMENT [P66M-D]

1. Position the vehicle on level ground.

2. Drain the transmission oil. Transmission Oil Replacement

3. Remove the following parts:
a. Member bracket Transmission Removal/Installation

b. Tunnel member Transmission Removal/Installation

c. Catalytic converter, middle pipe Service and Repair

d. Propeller shaft Service and Repair

4. Remove the oil seal using a flathead screwdriver.






5. Tap a new oil seal into the case using the SSTs.






6. Apply the specified oil to the oil seal lip.

7. Install in the reverse order of removal.

8. Add transmission oil. Transmission Oil Replacement