Headlamp Washer Hose: Service and Repair

HEADLIGHT CLEANER HOSE REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the front bumper. Removal and Replacement

3. Disconnect joint pipe.






4. Disconnect headlight cleaner hose from the headlight cleaner actuator.

5. Remove the headlight cleaner hose from the front bumper.

6. Install in the reverse order of removal.

Headlight Cleaner Hose Installation Note

1. Attach the center mark area of the head light cleaner hose to the center clip of the mesh grill.






2. Install the headlight cleaner hose as shown in the figure.