Procedures

WINDSHIELD WASHER NOZZLE CLEANING

CAUTION:
- When cleaning the washer nozzle, use a thinner rod than the nozzle hole to prevent internal damage. If the inside of the washer nozzle is deformed or damaged, the washer fluid may not spray normally.

1. Clean the washer nozzle by inserting and moving a needle or an equivalent tool back and forth.






- If the nozzle becomes clogged again after cleaning, remove the hose from washer nozzle. Make sure there is enough washer fluid. Then turn the washer switch on and flush the inside of the hose.