B0010:19

DTC B0010:11 / B0010:12 / B0010:13 / B0010:19 / B0010:1A

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- Resistance other than 1.54-5.06 ohms detected in passenger-side air bag module (inflator No.1) circuit
- Wiring harness between passenger-side air bag module (inflator No.1) and SAS control module has malfunction

Possible Causes

- Passenger-side air bag module (inflator No.1) connector malfunction
- Open or short circuit the wiring harness between the passenger-side air bag module (inflator No.1) and the SAS control module
- Passenger-side air bag module malfunction
- SAS control module malfunction

System Wiring Diagram





Diagnostic Procedure