B0094:13

DTC B0094:11 / B0094:13 / B0094:87 / B0094:96

System Malfunction Location





Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- Malfunction in the wiring harness between the crash zone sensor and SAS control module
- Malfunction in the crash zone sensor circuit

Possible Causes

- Crash zone sensor connector malfunction
- Open or short circuit or short to ground or short to power supply in the wiring harness between the crash zone sensor and SAS control module
- Crash zone sensor malfunction
- SAS control module malfunction

System Wiring Diagram





Diagnostic Procedure