B0094:55

DTC B0094:55

System Malfunction Location

- Configuration setting error (crash zone sensor structural malfunction)

Detection Condition

WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

- SAS control module configuration setting has not been done correctly

Possible Causes

- SAS control module configuration setting not implemented
- SAS control module configuration setting invalid
- The crash zone sensor is installed incorrectly or the incorrect sensor is installed.
- SAS control module malfunction

Diagnostic Procedure