Cowl Side Reinforcement Removal [Panel Replacement]

COWL SIDE REINFORCEMENT REMOVAL [PANEL REPLACEMENT]

Symbol Mark







Removal Procedure
1. Drill the 20 locations indicated shown in the figure.







2. Remove the cowl side panel.

COWL SIDE REINFORCEMENT INSTALLATION [PANEL REPLACEMENT]

Symbol Mark







Installation Procedure
1. When installing new parts, measure and adjust the body as necessary to conform with standard dimensions.
2. Drill holes for the plug welding before installing the new parts.
3. After temporarily installing new parts, make sure the related parts fit properly.
4. Plug weld the 20 locations indicated shown in the figure.