Cylinder Block Disassembly (I)

CYLINDER BLOCK DISASSEMBLY (I)

1. Disassemble in the order indicated in the table.






Knock Sensor Disassembly Note




1. Remove the knock sensor using the SST.

Drive Plate (ATX), Flywheel (MTX) Disassembly Note




1. Lock the drive plate (ATX) or flywheel (MTX) against rotation using the SST.
2. Remove the drive plate or flywheel installation bolts.

Oil Filter Disassembly Note




1. Remove the oil filter using the SST or commercially available, cup-type oil filter wrench (67 mm {2.6 in} diameter, 14 sided).

Oil Pan Disassembly Note




1. Remove the oil pan using a separator tool.