Fog/Driving Lamp Bulb: Service and Repair

FRONT FOG LIGHT BULB REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the screws shown in the figure and bend back the mudguard in the direction of the arrow.






3. Disconnect the connector.






4. Remove the front fog light bulb.

CAUTION:
- A bulb generates extremely high heat when it is illuminated.If the surface of the bulb is soiled, heat of higher temperature than normal will build, shortening the life of the bulb. When replacing the bulb, hold the metal flange, not the glass.

5. Install in the reverse order of removal.

Front Fog Light Bulb Installation Note

1. Install the front fog light bulb by turning it in the direction of the arrow.