Operation CHARM: Car repair manuals for everyone.

Lighting and Horns: Testing and Inspection





LIGHTING SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

1. Connect the M-MDS(IDS) to the DLC-2.






2. After vehicle identification, the following can be selected from the M-MDS initialization screen.

- Select the "Module Programming"

3. Then, select items from the screen menu in the following order.

- Select "Programmable Parameters"
- Select "BCM/GEM"

4. Select an item name, and then select option.





NOTE:
- Other than the above conditions, a "Japan Only" contents is also displayed, however, do not select the contents because it is for use in Japan Only.
- If the mode is set to "Extra High (Except Japan)" and "High (Except Japan)", the illumination level for illuminating the TNS and headlight increases. Therefore, the TNS and headlights illuminate when the ambient light is brighter than when the level is set to "Standard (Except Japan)". In addition, if the mode is set to "Low (Except Japan)" and "Extra Low (Except Japan)", the illumination level for illuminating the TNS and headlights decreases. Therefore, the TNS and headlights illuminate when the ambient light is lower than when the level is set to "Standard (Except Japan)".