Primary Shaft Components Disassembly

PRIMARY SHAFT COMPONENTS DISASSEMBLY

1. Disassemble in the order indicated in the table.






Bearing (4th Gear End) Disassembly Note




1. Remove the bearing using the SST.

3rd/4th Clutch Hub Component, 3rd Synchronizer Ring and 3rd Gear Disassembly Note
1. Remove the retaining ring.
2. Remove the 3rd/4th clutch hub component, 3rd synchronizer ring, and 3rd gear using the SST.






Bearing (Primary Shaft End) Disassembly Note




1. Remove the bearing using the SST.

Caution: Use protective plates in the vise to prevent damage to the primary shaft gear.