Primary Shaft Components Preinspection

PRIMARY SHAFT COMPONENTS PREINSPECTION

3rd Gear Thrust Clearance








1. Measure the clearance between 3rd gear and 2nd gear.
- If it exceeds the maximum specification, inspect the contact surfaces of the 3rd gear, 2nd gear and 3rd/4th clutch hub. Replace worn and damaged parts.

4th Gear Thrust Clearance








1. Measure the clearance between 4th gear and the bearing.
- If it exceeds the maximum specification, inspect the contact surfaces of the 4th gear, bearing, and 3rd/4th clutch hub. Replace worn and damaged parts.