Windshield Wiper Arm And Blade Removal/Installation

WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION

WARNING:
- When the switch the ignition to ON, and the wiper and washer switch is in the AUTO position, the windshield wipers could operate accidentally under the following conditions. Always switch the ignition, and the wiper and washer switch off before handling the windshield wipers; otherwise a pinched hand or fingers could result in injury or a wiper system malfunction:

- The windshield in the rain sensor installation area is touched.
- The windshield is subjected to an impact.
- The rain sensor is subjected to an impact from inside the vehicle.
- Water is poured on the windshield.

1. Remove in the order indicated in the table.










2. Install in the reverse order of removal.

3. Adjust the windshield wiper arm and blade. Windshield Wiper Arm And Blade Adjustment

Windshield Wiper Arm Installation Note

1. Clean the serrated connecting part with a wire brush before installing the windshield wiper arm.